Customers Waiting LED

Parameter	Description
Name	Name of the Unit.
Description	Description of the Unit.
Type name	Name of the Unit Type.
Type description	Description of the Unit Type.
Unit id	Identification code of the Unit.
Included queues	Included queues when calculating number of waiting Customers.
Bell on 0 to 1	When this check box is checked, a bell is sounded when the number of waiting Customers goes from 0 to 1.
Bell on waiting	Sound the bell when waiting increases to this value. Set to 0 to disable.
Flash on waiting	Flash the display when waiting goes to this value or higher. Set to 0 to disable.
Show 0 waiting	Check this check box to show 0 if no waiting Customers. If not checked, the display will turn off if there are no waiting Customers.
Device Controller	From the drop-down list, select the Device Controller that should be used.

Parameter	Description
Default name	Default name of the Unit.
Description	Description of the Unit.
Unit Identifiers	The two columns of the table are: • Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the Branch. • Logic Id - An ID used in the connectors. The Logic Id continues with the next number in the sequence of the auto generated ID's within the Unit Type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, Presentation Point, or Device Controller.
Unit id	Identification code of the Unit.
ID Code	Id code. Valid values between 1-125.
Included queues	The Queues that the display will show number of waiting Customers from.
Device Controller	The Device Controller that is used.